WHYNTER 3.1 CU. FT. COMPACT DOUBLE DOOR
FREEZER / REFRIGERATOR
MODEL # : MRF-310DB
Instruction Manual
Congratulations on your new WHYNTER product. To ensure proper operation, please read this
Instruction Manual carefully before using this product. Keep this manual in a safe place for future
reference.
FEATURES
Perfect for workplaces, dorm rooms, or an additional refrigerator for your home, the Whynter Compact Double
Door Refrigerator can store fresh and frozen food as well as your favorite beverages. A dry erase door with
neon marker can be used to write notes and then can be easily wiped away. Added features include bottle and
can storage on door, low noise level, and adjustable thermostat. This compressor unit is environmentally
friendly with R134a refrigerant gas.
PARTS
NOTE: A drip tray is installed on top of the compressor which can be located at the back of the unit. This tray
will catch all the condensation collected by the unit.
3
TO REDUCE THE RISK OF FIRE, ELECTRICAL
SHOCK, OR INJURY WHEN USING YOUR
REFRIGERATOR, FOLLOW THESE BASIC
PRECAUTIONS:
WARNING
READ ALL INSTRUCTIONS BEFORE USING THE REFRIGERATOR.
WARNING: RISK OF DANGER TO SMALL CHILDREN AND SMALL ANIMALS.
ENTRAPMENT AND SUFFOCATION DANGER IF NOT PROPERLY SECURED. DISPOSED
OR ABANDONED APPLIANCES ARE STILL DANGEROUS
BEFORE YOU DISPOSE OF YOUR REFRIGERATOR: REMOVE THE DOOR TO PREVENT
CHILDREN FROM CLIMBING INTO THE UNIT.
NEVERALLOW CHILDRENTO OPERATE, PLAYWITH, ORCRAWLINTO THE APPLIANCE.
NEVER CLEAN REFRIGERATOR PARTS WITH FLAMMABLE FLUIDS. THE FUMES CAN
CREATE A FIRE HAZARD.
DO NOT STORE ORUSE GASOLINE ORANYOTHERFLAMMABLE VAPORS ANDLIQUIDS
IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE. THEFUMES CAN CREATE AFIRE
HAZARD.
SAFETY PRECAUTIONS
Read all of the instructions before using this appliance. When using this appliance, always exercise
basic safety precautions, including the following:
Do not use if the power supply cord is damaged. If damaged, it must be replaced by qualified
technician/electrician.
Ensure the appliance is unplugged before cleaning or if not in use.
To clean the appliance use only mild detergents or glass cleaning products. Never use harsh
chemicals or solvents.
Do not use this appliance with an extension cord or power strip. Please ensure that the
appliance is plugged directly into the electrical outlet.
Close the doors immediately after opening.
Avoid placing the appliance near external heat sources or direct sunlight.
Make sure the appliance is placed on a flat, level, and solid surface.
Make sure that the surface on which the appliance is placed is strong enough to hold the
appliance once it is fully loaded.
The refrigerator is an electrical appliance. To avoid serious injury from electrical shock, do not
operate the refrigerator with wet hands, while standing on a wet surface, or while standing in
water.
Do not expose this appliance to rain or excessive moisture.
Do not turn the appliance upside down, on its side, or 45° or more off level.
Never pull the power cord to disconnect the unit from an outlet. Grasp the plug directly and pull
it from the outlet.
This appliance is designed for non-commercial use only.
Do not plug this appliance into the power socket before setup is completed.
The cord should be secured behind the unit and should not be left exposed or dangling.
Do not move this appliance without securing the doors.
Performance may vary based on operational and ambient conditions.
4
Do not remove any safety, warning, or product information labels from your refrigerator.
Use two or more people to move refrigerator. Failure to do so can result in back or other injury
Before you begin
Preparing the refrigerator for use before you plug the refrigerator in to a power supply, be sure to let it
stand upright for at least 24 hours to allow the compressor’s oils to settle.
Unpacking the refrigerator
Carefully remove the packaging materials. Remove any shipping tape and glue from your refrigerator
before using. Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to
remove tape or glue. These products can damage the surface of your refrigerator. If any parts are
missing, please contact our customer service. Put the refrigerator on a level and flat surface and away
from direct sunlight and other sources of heat such as a stove, furnace, radiator, etc. The appliance
must be positioned so that the power plug is accessible.
Before using your refrigerator, you are strongly recommended to clean it thoroughly. (This
process should clean the unit of any impurities that may have been left behind during the manufacturing
process.)
1. Clean the interior with a diluted cleaning solution, warm water and a soft cloth. (DO NOT use any
caustic or abrasive solutions) (Do not clean your refrigerator with flammable fluids.)
2. The outside of the refrigerator should be cleaned regularly with a mild detergent and warm water.
3. Dry the interior and exterior with a soft cloth.
REQUIREMENTS
Installation Requirements
The refrigerator has been designed for free-standing installation which will allow you to install the unit in
almost any place you desire. Please make sure to follow the instructions for clearance, water and
electrical requirements.
Clearance and Environment Requirements
Choose a well-ventilated area with temperatures above 50°F and below 90°F. Operation
outside these temperatures may result in lowered production or may cause other adverse
effects.
This unit must be installed in an area protected from the elements, e.g., wind, rain, water spray
or drips. The refrigerator should not be located next to ovens, grills or other high heat sources.
The unit should be located on a firm and level surface that is able to support the refrigerator’s
total weight with water.
There must be at least 4 inches of space around the back and sides of the unit for proper air
circulation.
If you are installing your refrigerator next to a fixed wall, leave sufficient space on the hinge side
to allow for the door to swing open.
Electrical Requirements
Read all safety precautions listed at the beginning of this manual. It is recommended that a separate
circuit serving only your refrigerator be provided. Use receptacles that cannot be turned off by a switch
or pull chain.
The refrigerator is equipped with a power supply cord having a 3-prong grounding plug. To minimize
possible shock hazard, the cord must be plugged into a mating 3-pronged and grounding-type wall
5
receptacle providing 110-120V, 60Hz, grounded in accordance with the National Electrical Code and
local codes and ordinances. If a mating wall receptacle is not available, it is the personal responsibility
of the customer to have a properly grounded, 3-prong wall receptacle installed by a certified electrician.
NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the refrigerator
control to OFF and then disconnect the refrigerator from the electrical source. When you are finished,
connect the refrigerator to the electrical source and reset the control to the desired setting.
OPERATION
Keep flammable materials and vapors, such as gasoline, away from refrigerator. Failure to do so can
result in death, explosion, fine or burns.
Before using your refrigerator, it is strongly recommended to clean it thoroughly. After you remove all of
the packaging materials, clean the inside of your refrigerator before using it. To obtain the best possible
results from your refrigerator, it is important that you operate it properly.
Setting the Thermostat control
The thermostat knob controls the internal
temperature. The higher the number setting,
the longer the compressor will run to keep the
temperature colder. The temperature controls
for the refrigerator and freezer are located at
the top shelf of the refrigerating compartment.
Set your refrigerator’s thermostat control at 3
on its first run. Give your refrigerator time to
cool down completely. It is best to wait for 24
hours before adding food. When the
thermostat control knob is set to OFF, the
refrigerator stops running.
Changing the Light Bulbs
To change the light bulb, make sure to unplug refrigerator or disconnect unit from power supply before
removing the bulb. Replace the bulb with a 10-watt appliance bulb. Please note that not all bulbs will fit
your refrigerator. Be sure to replace the bulb with one of the same size and shape. Plug in the
refrigerator or reconnect refrigerator to power supply after bulb replacement.
Power Interruptions
If the electricity goes off for a short period, keep both doors closed to help food stay cold and frozen. If
the power will be out for a longer period of time, remove food from the freezer and store it in a frozen
food locker.
Fresh Food Storage
Wrap or store food in the refrigerator in airtight and moisture – proof material. This prevents
food odor and taste transfer throughout refrigerator
Fruit – wash, dry and store in refrigerator in plastic bags or crisper
Leafy vegetables- remove wrapping and trim or tear off bruised and discolored areas then wash
in cold water and drain. Place in plastic bag or plastic container and store in crisper
Fish – use fresh fish the same day as purchased
6
Meat – store most meat in original wrapping as long as it is airtight and moisture – proof.
Re-wrap if necessary.
Leftovers – cover leftovers with plastic wrap or aluminum foil. Plastic containers with tight-seal
lid can also be used.
Frozen Food Storage
The freezer compartment is designed for storing frozen food and for freezing food at home. Successful
freezing depends on the correct packaging. When you close and seal the package you must not allow
air or moisture in or out. If you do, you could have food odor and taste transfer throughout the
refrigerator, and will also cause frozen food to dry out.
Note: Never put bottled food or drinks in the freezer compartment.
For best performance, leave enough space in the freezer and refrigerator compartment for air to
circulate around the packages. Also let enough room at the front so the door can close tightly.
Defrosting
Refrigerator compartment - Defrosting process is automatic by thermostat knob Melted frost
flow into drip tray and automatic evaporating.
Freezer compartment – Defrosting for the freezer compartment is by manual process.
.
.
.
.
Turn the thermostat knob to set at OFF position and leave the freezer door open.
Remove all food, ice cube tray and shelf or transfer to refrigerating compartment.
Clean and wipe out the melted frost with a cloth.
After defrosting, turn thermostat knob to origin position.
Note: To avoid damaging the freezing compartment wall, do not use any sharp objects to remove the
frost or separate the frozen food.
NormalSounds
Your new refrigerator may make sounds that are not familiar to you. Most of the new sounds are
normal. Hard surfaces like the floor, walls can make the sounds seem louder than they actually are.
The following describes the kinds of sounds that might be new to you and what may be making them.
Rattling noises may be produced from the flow of the refrigerant.
The compressor may make a pulsating or high-pitched sound.
The compressor may also produce a low tone humming sound.
As each cycle ends, you may hear a gurgling sound due to the refrigerant flowing.
You may hear fan noise and air being forced over the condenser by the condenser fan.
Dry Erase Door Panel Feature
Featuring a dry-erase finish on the door panel, the Whynter MRF-310DB refrigerator can be used to
record messages, manage schedules, or draw pictures right on the refrigerator. Dry-erase markers
make sketches easy to erase, wiping away concerns that temporary messages and artwork will become
permanent.
Use only dry erase markers pens that are made specifically for dry erase panels. The Whynter
MRF-310DB refrigerator comes with one (1) neon blue dry erase marker.
Clean the surface regularly with a damp cloth to ensure the condition of the panel is maintained.
If you accidentally use a permanent ink marker or pen on the surface of your refrigerator door,
you can use the ink from the dry erase marker as a solvent. Scribble over the permanent mark
with the dry erase marker and wipe away with a paper towel. You may have to do this more than
one to clean it off entirely.
Never use ball point pens, pencils or sharp, metal-end hard objects to write on the dry erase
panel as this permanently damage the surface of the unit.
7
REVERSING THE DOOR POSITION
Caution: To avoid injury to yourself and/or property, we recommend someone assist you during the door
reversal process.
1. To access the lower hinge assembly, tilt back
the refrigerator cabinet or lay the refrigerator
on its back
2. Remove both legs located at the front of the
cabinet: adjustable left on hinge side and fixed
leg on opposite side.
3. Remove the screws holding the lower hinge
assembly to the cabinet
4. Remove the main door assembly from the
refrigerator cabinet by opening the door and
pulling down.
5. Remove the screws from the middle hinge
assembly. Then remove the hinge and freezer
door.
6. Remove the top cover, hinge, and screws
7. Re-install the top hinge pin on the opposite
side of the cabinet
8. Remove the door plugs and door bushing
located on the top and bottom of each door
assembly
9. Interchange positions of plugs and bushings
on both doors
10. Re-install door assembly on cabinet
11. Re-install the middle hinge assembly on the
opposite side
12. Make sure the door assembly is properly
aligned on the cabinet, before tightening
hinge screws
13. Re-install the main door assembly on cabinet
14. Re-install the lower hinge assembly on the
opposite side
15. Make sure to change bushing and screw on
opposite sides on bottom of unit
16. Make sure the door assembly is properly
aligned on the cabinet, before tightening lower
hinge screws
17. Re-install both legs (reversed from the original
positions: adjustable leg on hinge and fixed
leg on opposite side.)
8
CLEANING AND MAINTENANCE
The refrigerator must be thoroughly cleaned if it has been left unused for a long time
DO NOT turn the refrigerator upside down to dry! This will cause the oils from the compressor to shift,
which can result in the machine breaking or becoming inoperable.
Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life.
Never use a solvent-based cleaning agent. These cleaners may transmit taste to the ice cubes, or
damage and discolor the interior.
ALWAYS unplug the unit before cleaning the exterior and interior.
Routine maintenance
1. Using a 10:1 ratio of water to either white vinegar or lemon juice, scrub the interior of the refrigerator
with the solution.
2. Remove the solution from the refrigerator by wiping down the refrigerator’s interior with hot water.
3. Leave the door open for a few minutes to have the interior of the unit air dried
4. Plug the refrigerator to the outlet and is ready for use.
If the refrigerator will not be used for an extended period of time, you should unplug the unit from power,
drain the water from the reservoir and dry the interior with a clean soft cloth.
Note: Do not touch the power plug when your hands are wet. Never unplug the unit by pulling on the
plug.
SPECIFICATIONS
Description of product
Voltage/Frequency
Portable refrigerator/freezer
AC 115V~60Hz
Rated Power
100W
Rated Current
1.3A
Color
Refrigerant
Black Dry Erase Surface
R134a
Dimensions (Height x Width x Depth)
Freezer Internal Dimensions (Height x Width x Depth)
33” H X 18.5” W X 19.75” D
8.25” H X 15.25” W X 14.75” D
Refrigerator Internal Dimensions (Height x Width x Depth) 18” H X 15.25” W X 14.75” D
Weight
52 lbs
Total Storage Volume : 3.1 cu. ft. / 87
Liters
Freezer Volume: 0.9 cu. ft. / 26 Liters
Refrigerator Volume: 2.2 cu. ft. / 61 Liters
Capacity:
Note: Technical data and performance information provided for reference only.
Specifications are subject to change. Check the rating label on the refrigerator for the most accurate
information.
9
TROUBLESHOOTING
Many common refrigerator problems are easily resolved. Try the troubleshooting suggestions below to
see if the problems can be resolved before having to contact the service department.
Problem
Possible Causes
Solutions
The refrigerator is unplugged.
The refrigerator power switch is
OFF
Plug in the refrigerator.
Check if the power outlet is
working
The machine won't
operate.
The power supply cord is
unplugged.
The household fuse or circuit
breaker has tripped.
Plug in refrigerator.
Check circuit breaker
Check light bulb if properly
installed
The light does not work
The light bulb is loose in the socket.
The light bulb has burned out
Replace light Bulb
The position of food stored touches
the refrigerant power of refrigerator
back wall
Put a space in between the food
and the refrigerator back wall
Adjust refrigerator’s temperature
Food in the refrigerator
compartment is freezing
The thermostat knob is set too cold
The air vents are blocked in the
compartment
Remove obstruction or items that
are blocking the air vents
The door(s) are opened too often
A large amount of food has just
been added to the refrigerator or
freezer compartment
Do not overload the refrigerator
of large amount of food
Adjust thermostat control
Food in the refrigerator
compartment is not cold
The position of thermostat knob is
adjusted too low
The drain – off mouth entrance is
blocked
Evaporator pan not in place
Remove obstruction or items that
are causes the blockage
Secure evaporator pan
Refrigerator leaks
The refrigerator is not leveled and
Make sure that unit is on leveled
surface
locked.
The body of the refrigerator touches
Make sure unit has 4 inches
clearance from wall
Noise during operation
the wall
The air vents are blocked in the
compartment
The door(s) are opened too often
The room is humid
The food is not packaged correctly
The control is not set correctly of
the surrounding conditions
Remove obstruction or items that
are blocking the air vents
Make sure food are securely
sealed
There is interior moisture
build - up
Set the correct temperature
Food packages are blocking the
door open
Remove obstruction or items that
blocks the door
shelves are out of position
gaskets are dirty
refrigerator is not level
Properly secure the shelves
Check door gaskets
Make sure that unit is on leveled
surface
Doors will not close
completely
10
ONE YEAR LIMITED WARRANTY
This Whynter refrigerator is warranted, to the original owner within the 48 continental states, for one
year from the date of purchase against defects in material and workmanship under normal use and
service. Should your refrigerator prove defective within one year from the date of purchase, return the
defective part or unit, freight prepaid (within two months of purchase; after two months to one year,
customer will be responsible for freight cost to Whynter’s service department), along with an
explanation of the claim to Whynter LLC. Please package the refrigerator carefully in its original
packaging material to avoid damage in transit. Please retain the original box and packaging material.
Under this warranty, Whynter will repair or replace any parts found defective. This warranty is not
transferable. After the expiration of the warranty, the cost of labor and parts will be the responsibility of
the original owner of the unit.
THIS WARRANTY DOES NOT COVER:
Acts of God, such as fire, flood, hurricanes, earthquakes and tornadoes.
Damage, accidental or otherwise, to the refrigerator while in the possession of a consumer not
caused by a defect in material or workmanship;
Damage caused by consumer misuse, tampering, or failure to follow the care and special
handling provisions in the instructions.
Damage to the finish of the case, or other appearance parts caused by wear.
Damage caused by repairs or alterations to the product by anyone other than authorized by the
manufacturer.
Freight and Insurance cost for the warranty service.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE
PRODUCT REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED
WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED
BY LAW, BUT NOT LESS THAN ONE YEAR. WHYNTER SHALL NOT BE LIABLE FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND
INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN LIMITED
WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSE- QUENTIAL DAMAGES, OR
LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR
EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
To obtain service or information, contact
866-WHYNTER.
Product contents and specifications may change without notice.
Copyright © 2013 Whynter LLC
11
|