Zanussi Refrigerator ZU 8124 User Manual

INTEGRATED  
BUILT-UNDER  
REFRIGERATOR  
ZU 8124  
OPERATING INSTRUCTIONS  
822941018-01-02/98  
 
Content  
Important Safety Instructions  
Environmental Information  
4
Maintenance and Cleaning  
11  
Internal Ceaning  
External Cleaning  
Replace light bulb  
11  
11  
12  
5
Packaging  
5
5
Old Appliances  
Something not Working  
Service and Spare Parts  
Customer Care Department  
Technical Terminology  
12  
13  
13  
14  
Before Use  
5
5
Packaging  
Installation  
6
6
Installation Location  
Installation  
6
7
Regulations, Standards,  
Guidelines  
Electrical Connection  
14  
15  
Description of the appliance  
7
7
Peace of mind for  
twenty four month  
Standard guarantee conditions  
Exclusions  
View of the appliance  
Prior to Initial Start–Up  
Initial Use  
8
8
9
9
15  
15  
15  
European Guarantee  
Switching off the appliance  
Food Storage  
Fridge Compartment  
Freezer Compartment  
9
9
Preparation of Ice Cubes  
Defrosting your Appliance  
10  
10  
Fridge  
10  
10  
Freezer compartment  
Hints and Tips  
11  
Normal Operating Sounds  
Food Storage  
11  
11  
11  
Energy Saving Advice  
3
 
1 Important Safety Instructions  
These warnings are provided in the interests of your safety. Ensure that you understand them  
all before installing or using this appliance. Your safety is of paramount importance. If you are  
unsure about any of the meanings or these warnings contact the Customer Care Department.  
Prior to Installation  
• There is a risk of suffocation! Keep  
packaging material away from children!  
• Check the refrigerator for transport damage.  
Under no circumstances should a damaged  
appliance be installed! In the event of  
During Use  
• This appliance is designed for domestic use  
only, specifically for the storage of edible  
foodstuffs only. It is not intended for  
commercial or industrial use  
damage, please contact your retailer.  
Installation  
• This appliance is heavy. Care should be  
taken when moving it.  
• Containers with flammable gases or liquids  
can leak at low temperatures. Do not store  
any containers with flammable materials  
such as, spray cans, fire extinguisher refill  
cartridges etc in the refrigerator.  
• It is dangerous to alter the specifications or  
attempt to modify this product in any way.  
• Ensure that the appliance does not stand on  
the electrical supply cable. If the supply  
cable is damaged, it must be replaced by a  
cable available from your local Service  
Force Centre.  
• Frozen food should not be refrozen once it  
has thawed out.  
• Do not place carbonated or fizzy drinks in  
the freezer compartment.  
• Any electrical work required to install this  
appliance should be carried out by a quali-  
fied electrician or competent person.  
• Ice lollies can cause ’frost/freezer burns’ if  
consumed straight from the star compart-  
ment.  
• Parts which heat up should not be exposed.  
Whenever possible, the back of the  
• Do not remove items from the freezer com-  
partment if your hands are damp/wet, as this  
could cause skin abrasions or frost/freezer  
burns.  
appliance should be close to a wall, but lea-  
ving the required distance for ventilation, as  
stated in the installation instructions.  
• Bottles and cans must not be placed in the  
freezer compartment. They can burst when  
the contents freeze.  
• The appliance should be left for 2 hours after  
installation before it is turned on, in order to  
allow the refrigerant to settle.  
• Manufacturers´ recommendet storage times  
should be adhered to. Refer to relevant  
instructions.  
Refrigerant  
The refrigerant isobutane (R600a) is contained  
within the refrigerant circuit of the appliance, a  
natural gas with a high level of environmental  
compatibility, which is nevertheless flammable.  
Maintenance and Cleaning  
• Before cleaning, always switch off the  
appliance and disconnect from the electrical  
supply.  
• During transportation and installation of the  
appliance, be certain that none of the com-  
ponents of the refrigerant circuit become  
damaged.  
• When unplugging always pull the plug from  
the mains socket, do not pull on the cable.  
• If the refrigerant circuit should become  
damaged:  
Servicing  
• This product should be serviced by an  
authorised engineer and only genuine spare  
parts should be used.  
– avoid open flames and sources of  
ignition;  
– thoroughly ventilate the room in which the  
appliance is situated.  
• Under no circumstances should you attempt  
to repair the appliance yourself. Repairs  
carried out by inexperienced persons may  
cause injury or serious malfunctioning.  
Contact your local Service Force Centre.  
Child Safety  
• Do not allow children to tamper with the con-  
trols or play with the product.  
4
 
Environmental Information  
Packaging  
Old Appliances  
All transit packaging materials are environmen-  
tally compatible and can be reused. Wood is un-  
treated. The plastics can be recycled and are  
identified as follows:  
When disposing of your old appliance:  
Make the appliance unusable by cutting off the  
cable and remove any door catches to ensure  
small children cannot be trapped inside.  
>PE< for polyethylene, e.g. the outer covering  
and the bags in the interior.  
>PS< for polystyrene foam, e.g. the pads, which  
are pure hydrocarbon compounds and can be  
recycled.  
Help to keep your country tidy - use an authori-  
sed disposal site.  
The carton parts are made from recycled paper.  
Please dispose of the packaging with due care  
for the environment.  
Before Use  
Packaging  
0 Pull off the adhesive tape on the left and  
right side of the door.  
Any remnants of adhesive can be removed  
with white spirit.  
3
0 Remove all adhesive tape and packaging  
from the interior of the appliance.  
0 Remove the protection from the seal on  
the inside of the door.  
0 Remove the transport protection pieces  
from the rails and pull off the adhesive  
tape.  
0 Wash the inside of the appliance with luke-  
warm water with a little bicarbonate of  
soda added (5 ml to 0.5 litre of water). Do  
not use soap or detergent as the smell  
may linger. Dry the appliance thoroughly.  
5
 
Installation  
Installation Location  
The appliance should be installed in a well venti-  
lated, dry room.  
Energy use is affected by the ambient tempera-  
ture.  
The appliance should therefore  
– not be exposed to direct sunlight;  
– not be installed next to radiators, cookers  
or other sources of heat;  
– only be installed at a location whose ambi-  
ent temperature corresponds to the cli-  
mate classification, for which the appliance  
is designed.  
Climate  
classification  
for an ambient  
temperature of  
The climate classification can be found on the  
serial plate, which is located at the left on the  
inside of the appliance.  
The following table shows which ambient tempe-  
rature is correct for each climate classification:  
SN  
N
+10 to +32 °C  
+16 to +32 °C  
+18 to +38 °C  
+18 to +43 °C  
ST  
T
If installation next to a source of heat is una-  
voidable, the following minimum clearances  
must be maintained at the sides of the  
appliance:  
– for electric cookers 3 cm;  
– for oil and coal fired ranges 30 cm.  
If these clearances cannot be maintained a heat  
insulating pad is required between the cooker  
and the refrigeration appliance.  
If the refrigeration appliance is installed next to  
another refrigerator or freezer a clearance of 5  
cm at the sides is required, in order to prevent  
the formation of condensation on the outside of  
the appliance.  
Installation  
See installation instructions supplied.  
Please check whether, after installing your  
appliance and especially after rehingeing the  
door, the door seal seals right round. An untight  
door seal may lead to heavy frosting and thereby  
to a higher power consumption (see also  
„Something not Working“).  
6
 
Electrical Connection  
Any electrical work required to install this  
appliance should be carried out by a qualified  
electrician or competent person.  
1. The wire coloured green and yellow must be  
connected to the terminal marked with the let-  
ter „E“ or by the earth symbol or coloured  
green and yellow.  
2. The wire coloured blue must be connected to  
the terminal „N“ or coloured black.  
WARNING – THIS APPLIANCE MUST  
BE EARTHED  
1
3. The wire coloured brown must be connected  
to the terminal marked „L“ or coloured red.  
4. Upon completion there must be not cut, or  
stray strands of wire present and the cord  
clamp must be secure over the outer sheat.  
The manufacturer declines any liability  
should these safety measures not be obser-  
ved.  
Before switching on, make sure the electricity  
supply voltage is the same as that indicated on  
the appliance rating plate. The rating plate is  
inside, on the left.  
The appliance is supplied with a 13 amp plug fit-  
ted. In the event of having to change the fuse in  
the plug supplied, a 13 amp ASTA approved (BS  
1362) fuse must be used.  
Warning! A cut-off plug inserted into a 13  
1
amp socket is a serious safety (shock)  
hazard. Ensure that the cut-off plug is dis-  
posed of safely.  
Green  
& Yellow  
Important  
The wires in the mains lead are coloured in  
accordance with the following code:  
Green and Yellow  
Blue  
Brown  
Earth  
Neutral  
Live  
Brown  
Blue  
As the colours of the wires in the mains lead of  
this appliance may not correspond with the  
coloured markings indentifying the terminals in  
your plug, proceed as follows:  
Cord Clamp  
Description of the appliance  
View of the appliance  
Temperature regulator and light switch  
Butter/cheese compartment  
Door storage compartment  
Bottle shelf  
Vegetable basket  
Storage racks  
Freezer compartment  
Rating plate  
7
 
Prior to Initial Start–Up  
0 Please clean the appliance interior and all  
accessories prior to initial start-up (see  
section: “Before Use”).  
Initial Use  
Important! Only use the appliance when  
The following effects are of significance in  
respect of the interior temperature:  
– Ambient temperature;  
correctly installed!  
0 Plug the mains plug into the mains socket.  
When the door is opened the interior  
lighting comes on.  
– Quantity and temperature of the food  
stored;  
– Frequency with which the door is opened  
and how long it is left open.  
The following temperature settings can therefore  
only be considered as recommendations that  
may well need to be adapted to suit your particu-  
lar situation.  
Recommended settings:  
a) For normal refrigeration without using the  
freezer compartment:  
– Position "1" to higher setting;  
– If lower temperatures are required, mid  
position.  
1 Light switch  
2 Temperature regulator  
and ON/OFF switch  
b) When frozen foods are stored in the freezer  
compartment or fresh food is to be frozen, a  
temperature setting of between mid and col-  
dest setting should be selected, depending on  
the ambient temperature.  
The temperature regulator is also the ON/OFF  
switch.  
The large oval switch beside the temperature  
regulator is the light switch. When the door is  
opened and closed, the light switch switches the  
interior lighting on and off.  
A coin is needed to turn the temperature regula-  
tor. This makes it is more difficult to change the  
temperature setting accidentally (child protec-  
tion).  
Note: At the setting given under b) the fridge  
has an average temperature of approx. +5 °C;  
the average temperature in the freezer compart-  
ment is then approx. –18 °C or colder. These  
figures apply at ambient temperatures from  
+16 °C to +32 °C.  
At higher ambient temperatures, fresh food is  
properly frozen with the regulator set to a mid  
position, without the fridge becoming too cold.  
The temperature regulator setting  
shown means: Refrigeration off.  
Turn in the direction of "1":  
Refrigeration on, the compressor starts  
and then runs automatically.  
0 Turn the temperature regulator to the desi-  
red setting with the aid of a coin.  
The compressor starts and then runs automati-  
cally.  
Important!  
Position "1" means:  
Highest interior temperature (warmest  
setting)  
High ambient temperatures (e.g. on hot summer  
days) and a cold setting on the temperature  
regulator can cause the compressor to run  
continuously.  
This position means:  
Lowest interior temperature (coldest  
setting)  
8
 
Reason: when the ambient temperature is high,  
the compressor must run continuously to main-  
tain the low temperature in the appliance. The  
fridge will not be able to defrost since automatic  
defrosting of the fridge is only possible when the  
compressor is not running (see also "Defrosting"  
section). The result is the build up of a thick layer  
of frost on the fridge rear wall.  
If this happens, turn the temperature regulator  
back to a warmer setting. At this setting the com-  
pressor will be switched on and off as usual and  
automatic defrosting recommenced.  
Switching off the appliance  
0 To switch off the appliance, turn the tem-  
If the appliance is not going to be used for an  
extended period:  
perature regulator to position "0".  
0 If the door is to left open for an extended  
period, switch off the interior lighting by  
turning the temperature regulator to posi-  
tion "0".  
0 Switch off the appliance by turning the  
temperature regulator to position "0".  
0 Unplug or switch off of mains.  
0 Defrost freezer compartment and clean  
thoroughly (see section: “Maintenance and  
Cleaning”).  
0 Leave the door open to avoid the build up  
of odours.  
Food Storage  
not under any circumstances be frozen a  
second time.  
Fridge Compartment  
The correct temperature for safe storage of fresh  
food inside is 0°C to 5°C (32°F to 41°F).  
The warmest parts of the fridge compartment  
are are at the top storage rack, the vegetable  
basket and the storage compartments in the  
door.  
0 All foods must be packed air tight prior to  
freezing, so that they do not dry out or lose  
their flavour.  
Caution! Do not touch frozen food with wet  
hands. Your hands could freeze to the food.  
0 Lay the packaged food on the floor of the  
freezer compartment. Unfrozen food must  
not touch items already frozen, otherwise  
the frozen food could begin to defrost.  
• The following are suited for the packaging  
of frozen goods:  
Food should always be covered or packaged.  
• The following are suitable for packaging:  
– Polyethylen airtight bags and wraps;  
– Plastic containers with lids  
– Special plastic covers;  
– aluminium foil.  
– freezer bags and polyethylene wraps;  
– special cans for frozen goods;  
– extra–thick aluminium foil.  
Freezer Compartment  
• The following are suitable for sealing bags  
and wrap:  
The freezer compartment is for freezing and  
storing food.  
plastic clips, rubber bands or tape.  
Important!  
• Smooth the air out of the bag before  
sealing; air makes it easier for the frozen  
food to dry out.  
• The temperature in the freezer compart-  
ment must be –18 °C or colder before free-  
zing food or storing food already frozen.  
• Make flat packages, because these freeze  
more quickly.  
• Allow warm food to cool down before free-  
zing.  
• Do not fill cans for frozen goods to the brim  
with liquid or paste–like goods, because  
liquids expand during freezing.  
• Thawed foods which have not been pro-  
cessed further (cooked into meals) may  
9
 
Preparation of Ice Cubes  
0 Fill the ice cube tray 3/4 full with cold  
water, place it in the freezer compartment  
and leave to freeze.  
0 To loosen the frozen cubes, either bend  
the ice cube tray or hold it under running  
water for a few seconds.  
Important! Never try to free an ice tray that is  
frozen to the freezer compartment using pointed  
or sharp edged objects. Use a spoon handle or  
similar.  
Defrosting your Appliance  
Fridge  
The fridge defrosts automatically.  
The defrost water is collected in the drain chan-  
nel on the rear of the fridge, fed through the  
drain hole into the collection compartment in the  
base and then evaporated.  
The rear wall of the fridge covers with frost when  
the compressor is running, and defrosts when  
the compressor is off.  
Freezer compartment  
During use and when the freezer compartment  
door is opened, moisture is deposited in the  
freezer compartment as frost. Under no circum-  
stances use hard or pointed objects to remove  
frost.  
0 Switch off the appliance and unplug it, or  
pull the fuse or switch off of mains.  
0 Leave the refrigerator door open.  
0 Defrosting can be speeded up by putting  
bowls of hot (not boiling) water in the com-  
partment.  
0 The interior of the frozen food compart-  
ment can be wiped out using a solution of  
bicarbonate of soda and water and then  
dried as described under "Internal  
Cleaning"  
The freezer compartment should be defrosted  
regularly (approximately every two month) or  
when a layer of frost accumulates (approx. 4  
mm).  
1Warning!  
0 Ensure the control dial is in its normal  
position. SWITCH ON at the electricity  
supply.  
• Do not use electrical heating appliances or  
any other mechanical or artificial devices  
to speed up the defrosting process.  
0 Replace all fitments and food. Close door.  
• Do not use defrosting sprays, they can be  
hazardous to your health and/or contain  
substances that damage plastics.  
• If the temperature of frozen food is allowed  
to rise during defrosting, its storage life  
may be shortened.  
Caution! Do not touch frozen food with wet  
hands. Your hands could freeze to the food.  
0 Remove frozen food, wrap it in several lay-  
ers of newspaper and store it, covered, in  
a cool place.  
10  
 
Hints and Tips  
• Do not push food together too much, try to  
allow air to circulate around each item.  
Normal Operating Sounds  
You may hear faint gurgling or bubbling  
sounds when the refrigerant is pumped  
through the coils or tubing at the rear, to  
the cooling plate/evaporator.  
2 Energy Saving Advice  
• When the compressor is on, the refrigerant  
is being pumped round and you will hear a  
whirring sound or pulsating noise from the  
compressor.  
• Do not install the appliance close to  
sources of heat, such as a cooker, dishwa-  
sher or radiator.  
• Locate the appliance in a cool well ventila-  
ted room and make sure that the air ope-  
nings of the appliance are not obstructed.  
• A thermostat controls the compressor and  
you will hear a faint click when the thermo-  
stat cuts in and out.  
• Always leave warm food to cool down to  
room temperature before placing in the  
fridge.  
Food Storage  
Try to avoid keeping the door open for long  
periods or opening the door too frequently  
as warm air will enter the cabinet and  
cause the compressor to switch on unne-  
cessarily often.  
To obtain the best performance from your refri-  
gerator:  
• Do not store warm food or evaporating  
liquids.  
• Do not store food uncovered.  
• Ensure there are no obstructions preven-  
ting the door from closing properly.  
• Keep the time between buying chilled food  
and placing it in your refrigerator as short  
as possible.  
Maintenance and Cleaning  
Before any maintenance or cleaning work is  
carried out DISCONNECT the appliance from  
the ELECTRICITY supply.  
drain hole is clear at all times. If blocked,  
carefully clear using a piece of flexible cur-  
tain wire inserted into the drain outlet to  
remove the blockage. To do this remove  
the small plastic storage shelf at the base  
of the rear wall of the fridge and, after cle-  
aning, replace.  
Internal Cleaning  
0 Remove frozen food and the food from the  
refrigerator. Wrap frozen food in several  
layers of newspaper. Store it in a cool  
place, well covered.  
0 Regularly check the door seals and wipe  
clean to ensure they are clean and free  
from debris.  
0 Defrost the freezer compartment prior to  
cleaning (see "Defrosting" section).  
External Cleaning  
0 Clean the inside and accessories with  
warm water and bicarbonate of soda (5 ml  
to 0.5 litre of water). Rinse and dry  
thoroughly.  
0 Wash the outer cabinet with warm soapy  
water.  
Warning!  
• Do not use abrasive products  
1
Warning!  
1
• There are sharp edges on the underside of  
the product so care should be taken when  
cleaning.  
• Do not use detergents, abrasive powders,  
highly perfumed cleaning products, wax  
polishes or cleaning products containing  
bleach or alcohol.  
0 Clean the drain hole of the water through  
at regular intervals and ensure that the  
11  
 
Replace light bulb  
Warning! There is a risk of electric  
1
shocks! Before changing the light bulb,  
switch off the appliance and unplug it, or  
pull the fuse or the circuit breaker.  
Light bulb data: 220-240 V, max. 15 W,  
fitting: E 14  
0 To switch off the appliance, turn the tempe-  
rature regulator to position "0".  
0 Unplug the mains plug.  
0 To change the light bulb, undo the cross  
head screw and remove the light bulb  
cover downwards.  
0 Change the defective light bulb.  
0 Refit the light bulb cover and the cross  
head screw.  
Something not Working  
Before contacting your local service force centre, check the following points.  
Sympton  
Solution  
Check there is power at the socket  
Check there is not a power cut by checking the  
household lights.  
No power to the appliance.  
Check the fuse has not blown.  
Check the ambient temperature is within the  
appliances operating limits  
The temperature in the refrigerator is too high.  
Check the thermostat is turned to the correct set-  
ting relative to ambient conditions.  
Adjust the thermostat to give correct temperature  
control, see page 8  
Check that the door is closed.  
The compressor runs continuously  
The light does not come on.  
Large quantities of food have recently been pla-  
ced in the cabinet and/or door is frequently ope-  
ned.  
Check that air ventilation is not obstructed.  
Ensure the bulb is correctly fitted.  
Replace the bulb it has blown.  
Check the door light switch is not jammed.  
12  
 
Sympton  
Solution  
If the door seal is not airtight (probably after chan-  
ging over the door hinges) apply warm air to the  
non sealing area using a hair dryer set to a gentle  
heat. (do not use a fan heater for this purpose).  
This will make the rubber more supple and allow it  
to revert to its original shape.  
Excessive build up of frost.  
Noise  
Refer to Normal Operating Sounds  
The compressor does not start immediately after This is normal, the compressor starts after a  
changing the temperature setting.  
period of time.  
Water drain hole is blocked - see "Maintenance  
and Cleaning".  
Water on the floor  
If after the above checks there is still a fault, call your local Service Force Centre.  
In-guarantee customers should ensure that the above checks have been made as the engineer will  
make a charge if the fault is not a mechanical or electrical breakdown.  
Please note that proof of purchase is required for in-guarantee service calls.  
Service and Spare Parts  
In the event of your appliance requiring service,  
or if you wish to purchase spare parts please  
contact your local Zanussi Service Force Centre  
by telephoning:  
Before calling out an engineer, please ensure  
you have read the details under the heading  
„Something not Working“  
When you contact the Service Centre you will  
need to give the following details:  
08705 929929  
1. Your name, address and post code  
2. Your telephone number  
3. Clear and concise details of the fault  
4. The model and serial number of the appliance  
(found on the rating plate)  
Your call be routed the Service force Centre  
covering your post code area. The address of  
your local Service Force Centre is detailed in the  
accompanying Customer Care Book.  
5. The purchase date  
Customer Care Department  
For general enquiries concerning your Zanussi  
appliance or for further information on Zanussi  
products, you are invited to contact our Custo-  
mer Care Department by letter or telephone as  
follows:  
Customer Care Department  
Zanussi  
55-77 High Street  
Slough  
Berkshire  
SL1 1DZ  
Tel.: 08705 727727  
13  
 
Technical Terminology  
Refrigerant  
Compressor  
Liquids that can be used to a generate a  
cooling effect are known as refrigerants.  
They have a relatively low boiling-point,  
indeed so low, that the warmth from the  
food stored in the fridge or freezer can  
cause the refrigerant to boil and vaporise.  
The compressor looks like a small drum. It  
is driven by a built-in electric motor and is  
mounted on the base of the appliance at  
the rear. The task of the compressor is to  
draw in vaporised refrigerant from the eva-  
porator, to compress it, and to pass it on to  
the condenser.  
Refrigerant Circuit  
Closed circulation system that contains the  
refrigerant. The refrigerant circuit compri-  
ses primarily of an evaporator, a compres-  
sor, a condenser and pipe work.  
Condenser  
The condenser normally has the form of a  
grid. The refrigerant compressed in the  
compressor is liquefied in the condenser.  
During this process, heat is released to the  
surrounding air at the surface of the con-  
denser. The condenser is mounted on the  
base of the appliance.  
Evaporator  
The refrigerant is evaporated in the evapo-  
rator. Similar to all other liquids, refrigerant  
requires heat to evaporate. This heat is  
removed from the interior of the appliance,  
as a result the interior is cooled. The eva-  
porator is therefore located inside the  
appliance or placed in foam immediately  
behind the inner wall and thus not visible.  
Regulations, Standards, Guidelines  
This appliance was designed for household use  
This appliance is in accordance with the  
following EU guidelines:  
;
and was manufactured in accordance with the  
appropriate standards. The necessary measu-  
res in accordance with appliance safety legisla-  
tion regulations (GSG), accident prevention  
regulations for refrigeration appliances (VBG 20)  
and the regulations of the German Society of  
Electrical Engineers (VDE) were observed in the  
manufacture of this appliance.  
– 73/23/EWG dated 19 February 1973 - low  
voltage guidelines.  
– 89/336/EWG dated 3 May 1989  
(including guideline change notice 92/31/  
EWG) - EMV guideline  
The refrigerant circuit has been checked for  
leaks.  
14  
 
Peace of mind for twenty four month  
Standard guarantee conditions  
We, Zanussi Limited, undertake that if within 24 month of the date of the purchase this Zanussi  
appliance or any part thereof is proved to be defective by reason only of faulty workmanship or  
materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or  
carriage on condition that:  
• The appliance has been correctly installed and used only on the electricity supply stated on the  
rating plate  
• The appliance has been used for normal domestic purposes only, and in accordance with the  
manufacturer´s instructions  
• The appliance has not been serviced, maintained repaired, taken apart or tampered with by any  
person not authorised by us  
• All service work under this guarantee must be untertaken by a Zanussi Service Force Centre.  
• Any appliance or defective part replaced shall become the Company´s property  
• This guarantee is in addition to your statutory and other legal rights  
Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside  
these hours in which case a premium will be charged.  
Exclusions  
This guarantee does not cover:  
• Damage or calls resulting from transportation, improper use or neglect, the replacement of any light  
bulbs or removable parts of glass or plastic  
• Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances  
outside the United Kingdom  
• Appliances found to be in use within a commercial environment, plus those which are subject to  
rental agreements  
• Products of Zanussi manufacture which are not marketed by Zanussi limited.  
European Guarantee  
If you should move to another country within Europe then your guarantee moves with you to your new  
home subject to the following qualifications:  
• The guarantee starts from the date you first purchased your product.  
• The guarantee is for the same period and to the same extent for labour and parts as exist in the  
new country of use for this brand or range of products.  
• This guarantee relates to you and cannot be transferred to another user.  
Your new home is within the European Community (EC) or European Free Trade Area.  
• The product is installed and used in accordance with our instructions and is only used domestically,  
i. e. a normal household.  
• The product is installed taking into account regulations in your new country.  
• Before you move please contact your nearest Customer Care Centre, listed below, to give them  
details of your new home. They will then ensure that the local Service Organisation is aware of your  
move and able to look after you and your appliances.  
France  
Germany  
Italy  
Senlis  
+33 (0)3 44 62 29 99  
Nürnberg +49 (0)911 323 2600  
Pordenone +39 (0)1678 47053  
Stockholm +46 (0)8 738 7950  
Newbury +44 (0)1635 521313  
Sweden  
UK  
15  
 
 
 
 
 
 
 
 
 
 

Weider Home Gym 831150381 User Manual
Weider Home Gym WESY85310 User Manual
West Bend Popcorn Poppers 82416 User Manual
Westell Technologies Modem B90 36R305 User Manual
Whirlpool Ice Maker GI15NDXZB User Manual
X10 Wireless Technology Universal Remote IR18A User Manual
Yamaha Guitar BB3000 MA User Manual
Zanussi Microwave Oven ZOB 160 User Manual
Zenoah Trimmer CHTZ6010 User Manual
Zephyr Ventilation Hood ZGE E30AS User Manual